HP Store Online

Will any body point me to a tutorial to refill "HP 92A" toner?

Need to refill my toner "HP 92 A" (for HP 1100 printer). Will any one tell me how to open, fill and reassemble the toner? Or point me to any information on the Internet? Any help is appreciated.

Public Comments

1. Do not even try to refill toner. People have enough trouble trying to refill cartridges for inkjets.
2. - Remove the spring located on one end of the cartridge -Remove the two small pins holding the two halves together -Remove the screws on both ends of the portion with the roller cover with toner ( avoid touchin ) pay attention to the gears on the one of the ends -remove the screws of the plastic blade and remove it -Refill -reasemble -On the portion of the large roller (drum) remove the contact on the geared side of the drum (hold it with the drum on the top) and remove it, avoid touchin -remove the cleaning blade -dump the residues, this is the waste toner ( you can reuse it but the print quality will not be as good as should it may help in an emergency) DO NOT CLEAN THE EDGE OF THIS BLADE, IF YOU DO SO TRY TO PUT SOME TONER ON IT IN, IT WORKS A LUBRICANT TO AVOID THE DRUM FROM SEIZE -reasemble -put the two halves togather and try it Good luck
3. Here's a link for you. They have step by step instructions. The company only sells wholesale by large lots, so you'll nned to pick up the supplies on ebay or somewhere else.
4. Try buying a real cartridge because those refills set do not work. try reink.com and that is where I get my ink